How to Mount Your Phone on a DualSense Controller Safely
By Premium Video Game Accessories | Published: 2026-10-14
Category: Guides pratiques
A step-by-step guide to attaching your phone to a PS5 DualSense controller with the Nyko Smart Clip Plus, including mistakes to avoid and safety checks.
Quick answer
Clamp the Nyko Smart Clip Plus onto the DualSense controller first, then slide your phone into the spring-loaded holder with the screen facing you. Test the balance before you let go, and remove the phone before storing the controller. The whole process takes under a minute once you know the order.
Before you start: check your phone and controller
The Smart Clip Plus is designed for the DualSense controller, so it will not fit a DualShock 4 or most third-party pads without an adapter. Check that your phone is not in a thick wallet case; bulky cases can prevent the clamp from gripping the phone securely. If your phone has a pop socket or magnetic ring on the back, remove it first so the clip can sit flush against the phone's back panel.
Why the order of attachment matters
Attaching the clip to the controller before adding the phone keeps the controller stable on a table and reduces the chance of dropping your phone. If you attach the phone first, the combined weight makes it harder to line up the clip's controller grips, and you risk twisting the phone out of the holder. Work on a soft surface like a desk mat or towel so a slip does not damage the screen.
Adjusting for balance and comfort
Once the phone is seated, hold the controller with both hands and check whether the top-heavy weight pulls your wrists forward. The Smart Clip Plus positions the phone above the controller, so the balance point shifts upward. If your hands tire quickly, try tilting the phone slightly toward you using the clip's angle adjustment, or rest your forearms on a pillow while playing. For longer sessions, take breaks every 30 to 45 minutes to avoid wrist strain.
When to remove the phone
Take the phone out before you put the controller down for the night. Leaving it clamped overnight puts constant pressure on the clip's spring and the controller's plastic shell, which can loosen the fit over time. Also remove the phone before charging the controller, since the added weight can make the controller slide off a charging dock. If you use a charging station like the Nyko Charge Arc for PlayStation 5, the dock's drop-and-charge design works best when the controller is bare.
Step-by-step: mounting your phone safely
- Prepare a stable surface: Clear a flat area and place a soft cloth or mat underneath. Keep your phone and controller within reach but not on the edge. Checkpoint: the surface should not wobble when you press down.
- Attach the clip to the controller: Open the clip's controller grips and align them with the top edge of the DualSense, just above the touchpad. Press down until both sides snap over the controller's shell. Common mistake: forcing the clip onto the wrong controller model. It is made for DualSense, not DualShock 4.
- Open the phone holder: Pull the spring-loaded top arm upward with one hand while holding the clip's base steady with the other. Do not overextend the spring. Checkpoint: the holder should open smoothly without a grinding feel.
- Insert your phone screen-first: Slide the phone into the holder with the screen facing you and the bottom edge resting on the lower lip. Release the top arm slowly so it grips the phone. Common mistake: inserting the phone upside down. The screen should face you when you hold the controller normally.
- Test the grip and balance: Gently wiggle the phone to confirm it does not shift. Hold the controller with both hands and check whether the weight feels manageable. If the phone moves, remove it and check for a thick case or debris on the clamp pads.
- Adjust the viewing angle: Tilt the clip's arm to angle the phone toward your eyes. Tighten any adjustable joint by hand; do not use tools. Checkpoint: the phone should stay in position when you tilt the controller.
- Remove the phone after play: Open the top arm, lift the phone out, then detach the clip from the controller. Store the clip flat so the spring stays relaxed. Next step: if you use a charging dock, place the bare controller on it now.
Product facts
- Smart Clip Plus for PlayStation® 5 (DualSense™ Controller Phone Mount): The Nyko Smart Clip Plus for PlayStation 5 attaches your smartphone directly to your DualSense controller for a hands-free second-screen experience. This is the core function: it turns your controller into a phone holder so you can view guides, codes, or the PlayStation App without setting the phone down.
- Smart Clip Plus for PlayStation® 5 (DualSense™ Controller Phone Mount): It is designed for tracking guides, checking codes, using the PlayStation App, or positioning your phone's camera for mobile streaming and Let's Play recordings. Knowing the intended uses helps you decide whether a clip mount fits your play style or whether you need a different stand.
- Charge Arc™ for PlayStation®5: The Nyko Charge Arc for PlayStation 5 is a dual charging dock with a drop-and-charge design that stores and powers two controllers. If you charge controllers on a dock, remove the phone and clip first so the controller sits correctly and charges reliably.
