Power Kit Plus for Xbox: Charging Setup Guide

By Premium Video Game Accessories | Published: 2026-10-19

Category: How-to Guides

Learn how to set up the Nyko Power Kit Plus for Xbox Series X/S and Xbox One. Step-by-step instructions for installing and charging your rechargeable battery pack.

Quick answer

Set up your Power Kit Plus by inserting the rechargeable battery pack into your Xbox controller, then charge through the controller's USB port. No separate charging dock needed.

What makes the Power Kit Plus different

Unlike many third-party battery packs that require a dedicated charging stand, the Power Kit Plus charges directly through your Xbox controller. This means you don't need extra cables or docks cluttering your setup. The pack uses a standard micro-USB connection (the same cable that came with your controller), so you can charge while you play or when the controller is idle.

The 1200 mAh NiMH batteries deliver up to 25 hours of play per charge. That's roughly three times longer than a standard pair of AA alkalines, and you won't need to buy disposable batteries again.

Step-by-step setup guide

Open your controller battery compartment: Flip your Xbox Series X/S or Xbox One controller over. Press the tab on the battery cover and slide it off. Remove any existing batteries. Make sure the compartment is clean and free of old battery corrosion or debris before inserting the new pack.
Insert the Power Kit Plus battery pack: Align the battery pack's contacts with the metal terminals inside the compartment. Press firmly until the pack sits flush. The pack fits both Xbox Series X/S and Xbox One controllers, so no adapter is needed. If the pack doesn't slide in easily, check that you're inserting it in the correct orientation (contacts facing the controller's terminals).
Replace the battery cover: Slide the battery cover back into place until it clicks. The cover should sit flat with no gaps. A loose cover usually means the battery pack isn't fully seated. Remove the cover and press the pack down again.
Connect the charging cable: Plug a micro-USB cable into the port on the front of your controller (between the two shoulder buttons). Connect the other end to a USB port on your Xbox console or a 5V USB wall adapter. The controller's front USB port is the only way to charge the Power Kit Plus. Do not use the rear USB ports on the console—they may not supply enough power for charging while playing.
Check the charging status: On Xbox Series X/S, the controller's guide button will pulse with a slow orange light while charging. On Xbox One, the light stays solid white but the battery icon on screen shows a lightning bolt. A full charge takes about 4 hours. If the guide light doesn't pulse, try a different USB cable or port. Some third-party cables lack the data pins needed for charging.

Product details

Power Kit Plus For Xbox Series X/S™ and Xbox One™: The Power Kit Plus includes two 1200 mAh NiMH rechargeable battery packs designed for Xbox Series X/S and Xbox One controllers. You get up to 25 hours of gameplay per charge, so you can play longer without swapping batteries or hunting for AAs.
Power Kit Plus For Xbox Series X/S™ and Xbox One™