PlayPad Glow RGB Controller: Setup and Customization

Quick Answer

To set up the PlayPad Glow, put the controller in pairing mode and connect it to your Switch via the system's Controllers menu. Then customize the RGB lighting and button layout in the controller's settings.

Setup and Customization Steps

1. Charge the controller: Connect the PlayPad Glow to a power source using a USB-C cable and let it charge until the indicator light shows full. This ensures you won't run out of battery during setup. A common mistake is starting setup with a low battery, which can interrupt pairing. Always charge fully first.
2. Enter pairing mode: Press and hold the pairing button (usually located on the top of the controller) until the RGB lights start flashing. This indicates the controller is discoverable. If the lights don't flash, the controller might already be connected to another device. Turn off Bluetooth on that device and try again.
3. Pair with your Switch: On your Nintendo Switch, go to System Settings > Controllers and Sensors > Change Grip/Order. Select 'Pair New Controllers' and wait for the PlayPad Glow to appear. Select it to complete the connection. Make sure your Switch is in the latest system version; older firmware may not recognize the controller.
4. Customize RGB lighting: Once connected, access the controller's settings (either via the Switch's controller settings or a companion app if available) to cycle through RGB modes, adjust brightness, and choose colors that match your setup. Experiment with different modes to find one that's not distracting during gameplay—some modes are more subtle than others.
5. Map buttons to your preference: Use the Switch's button mapping feature (System Settings > Controllers and Sensors > Button Mapping) to remap buttons if you prefer a different layout. This is especially useful for games with unconventional controls. Remember that button mapping is saved per controller, so you can have different profiles for different games.

Product Facts

• PlayPad Glow™ Wireless RGB Controller for Nintendo Switch™: The PlayPad Glow features integrated, vibrant RGB light tubes framing the controller shell. The RGB lighting is not just for looks—it can be customized to match your setup and make the controller easier to spot in the dark.